1-800-366-7867 • Get a QuoteContact Us

Pumps & Fluid Handling Equipment



Flygt Submersible Pumps

Flygt Submersible Pump

Flygt submersible pumps are the recognized leader in the pump industry and remain the leader with superior design features, superior product and superior support.  Flygt invented the submersible pump more than sixty years ago and now have manufactured over 3 million submersible pumps, with the highest market share of large submersible pumps in the United States including Kansas. The reason for success resides in the design of Flygt submersible pumps including: Hard Iron-Hi Chrome  impellers and suctions, double row lower bearing, two tandem independent mechanical seals with tungsten-carbide stationary and rotating faces, lower mechanical seal with a patented “spin out” feature to expel particles away from the lower seal for longer seal life (see attached), motors rated with Class H insulation and Class H winding, and short shaft overhang. All these features showcase a pump that is not equaled by any other manufacturer of submersible pumps today.  Flygt’s reputation for durability and a long-life span translates to the following:

For more information on Flygt's Submersible Pumps click here

Chopper Pumps – Flygt

Flygt Chopper Pump - Wastewater Chopper pump features patented Flygt N-technology, which is renowned for its self-cleaning capabilities and sustained high efficiency. The chopper pump performs like no other, handling whatever goes down the drain — from rags and wood to clothing and other debris. Under extreme conditions, our energy-efficient chopper pumps run continuously with sustained hydraulic efficiency in heavy-duty applications such as: 1) Heavy-duty wastewater applications, 2) Correctional facilities / prisons, 3) Nursing Homes, 4) Anaerobic Digester Jet Motive Pumps.

Click here for more information on Flygt's Chopper Pumps

Borger – Rotary Lobe Pumps & Grinders

Borger Rotary Lobe Pumps are positive displacement  pump transferring sludge to and from thickeners, belt presses, centrifuges, rotary presses,  digesters , air entrained fluids, DAF, and industrial slurries. They handle thick solids greater than 2% up to 2000 gpm and pressures up t0 150 PSI. Rotary lobe pumps can run dry and are capable of self-priming. The rotation of the pair of lobes increases suction chamber pressure and creates a vacuum on the priming side of the pump drawing liquid into the pump chamber.

Watson Marlow Peristaltic Pumps – Hose & Tube Pumps

Watson Marlow Peristaltic Pumps - Positive displacement pump where the fluid is contained within a flexible tube or hose fitted inside a circular pump casing. As the rotor rotates part of the tube under compression is pinched closed forcing the fluid to be pumped to move through the tube.  Pumps include the following series:

  • Cased Drive: 530, 630, 730 Series Tube Pumps
  • QDos Tube Pumps
  • Bredel  / APEX -Hose Pumps
  • DuCoNite Bredel Hose Pumps
  • Sinusoidal Pumps - Certa  Polymer, Viscous Handling

Click here for more information and link to manufacturer

Pulsafeeder Metering Pumps

Pulsafeeder - For over 75 years, Pulsafeeder Engineered Products continues to be a leader in diaphragm and dosing pump technologies. With experience in various chemical injection applications, Pulsafeeder pumps and systems are manufactured to serve the unique requirements of our global customer base. We understand that each chemical has its own unique set of challenges that must be taken into consideration. With decades of experience, Pulsafeeder offers pumping technologies that meet and exceed industry requirements for safety, reliability, and precise control. Our pumps are known for their rugged construction, and dependable and repeatable performance in difficult environments. Pulsafeeder’s culture of quality and manufacturing excellence is reflected in our Certification to ISO 9001 and ISO 14001 standards.  Pump include the following series:

  • PULSAPRO
  • Pulsa
  • Pulsar
  • Eclipse
  • Eclipse Non-metallic
  • Packaged Systems

Pump Station Design Service offered Free with AutoCAD based on CFD / Model Tested – HI Approved Pump Station

 

Take advantage of Flygt pre-engineered station designs that are based on the results from computational fluid dynamics (CFD), physical modeling and verification with real-world installations. Flygt's "SECAD"  pump station tool provides in minutes, a customized design based on an  approved Hydraulic Institute (HI) Standards large station design. A complete 3D design is provided with AutoCAD drawings with self-cleaning design and  uniform approach flow to the pumps with no adverse hydraulic phenomena, eliminate issues with sediment or floating debris,  eliminate or reduce the costs relate to cleaning and maintenance. Ultimately, these improvements benefit our customers through lower cost and reduced risk related to pump station construction and operation.

 For more information on Flygt's free self-cleaning pump station design layout in AutoCAD click here:

Progressing Cavity Pump – Moyno EZstrip Sludge Pump

Moyno NOV  EZstrip™ progressing cavity sludge pump with a patented, revolutionary split-coupling can be quickly and easily disassembled, de-ragged, and maintained in place.  This can reduce maintenance time by more than 93% for significant cost savings.  The patented split-coupling allows for easy removal of the Stator and Rotor without disassembling piping connections. The EZstrip allows direct access to the wear parts and rotating assemblies, including full removal of the drive train in minutes, with no electrical disconnection required.

For more information on Moyno's EZstrip Pump click here

Grinder Pumps -Low Pressure Sewer System LPSS with progressing cavity grinder

Flygt Compit polyethylene pump stations equipped with Flygt Progressive Cavity Grinder Pumps. The submersible Flygt pump is equipped with a robust grinder Compit Grinder Pump with 238 gallon holding capacity mechanism which consists of high chrome steel for wear resistance that has  been proven over the last 20 years. The grinder has the ability to shred  all solids into very fine pieces that are easily passed through small pipe diameters. This solid passing capacity combined with the basins bowl shaped bottom eliminates sediment build up and keeps the station clean. The Compit also has a built in anti-flotation that  ballasts the station without the added cost of concrete, saving the customer up to 10% on installation cost. The Compit has an overall storage capacity of 238 gallons, and working  volume of 140 gallons versus 80 gallons often provided by other basins being installed today.

For more information on Flygt's PC Grinder Pumps click here

Split Case Pump – Aurora Pump

AURORA 410 Series horizontal or vertical split case pump has long been used for the handling of liquids where the utmost in reliability and accessibility is paramount. The 410 Series is a modern design based on Aurora’s over 90 years of experience with the design and manufacturing of split case pumps.

For more information on Aurora's Split Case Pump click here

End Suction Pumps – Aurora Pump

Aurora End Suction Pumps - Today’s installations demand quiet, smooth running pumps with long life. Aurora Pump’s 90 years of experience with design, sales and manufacturing of centrifugal pumps has led to the 3800 Series. These modern pumps with a clean, straightforward design were developed with maximum interchangeability in mind. Aurora’s highly reliable 3800 pumps offer an economical solution to your liquid handling problems, and come with an industry first 5 YEAR WARRANTY.

For more information on Aurora's End Suction Pump click here

Torque Flow -Recessed Impeller Pump for grit, primary sludge, digested sludge, scum; Wemco Model C, CE, E

WEMCO Torque-Flow® Recessed Impeller pump is a centrifugal pump with a radial recessed impeller out of the path of the pumped solids. This impeller uses about 15 percent of the fluid being pumped to create a vortex thus adding energy to the pumped fluid-solids. Features Hi-Chrome (650 BHN) hard construction ideally suited for highly abrasive applications, grit, slurries with gas entrainment, and for stringy or fibrous materials. The recessed impeller creates a vortex within the casing which traps the solids and expels them from the pump with minimal impeller contact.

Screw Flow Centrifugal – RAS, Low Head, Digested Sludge- Wemco

Wemco® - Screw-Flow Pump by Trillium Flow Technologies is ideal for return activated sludge (RAS) service where the pump could perform against a low total dynamic head while operating close to its best efficiency point (BEP) where bearing loads and shaft deflections are at a minimum. The screw-shaped impeller has improved clog-resistance was also required to eliminate maintenance to free the pumps from rags. The screw centrifugal pumps feature a single, spiral vane impeller with no blade edges exposed to the flow. A cutting groove cast into the liner shears off material that builds up around the impeller periphery and re-introduces it into the flow. The screw-centrifugal design provides clog-resistant pumping for trouble free movement of solids, and fibrous and stringy materials. The steep head-capacity curve produced by the impeller provides additional head to help push through any partial blockages.

Vertical Turbine Pumps

Floway Vertical Turbine

Weir Floway Vertical Turbine Pumps

Propeller Pumps

Flygt Propeller Pump

Xylem Flygt Propeller Pumps

Packaged Booster Skid

Flowtronex Package Booster Pump Station

Tigerflow

Rotary Lobe – Municipal KS, NE, IA

LobePro - Rotary Lobe Pumps are typically used to pump WWTP sludge to and from thickeners, belt presses, centrifuges, rotary presses and digesters. They handle thick solids greater than 2% up to 2000 gpm and pressures up to 150 PSI.

 

UGSI Encore 700 diaphragm metering pump

UGSI Encore 700 diaphragm metering pump combines the robustness of hydraulic diaphragm pumps with the simplicity and service-ability of a mechanical pump. Handles up to 660 GPH up to 175 psi with efficient, reliable and smooth discharge pattern through the use of a variable non-loss-motion eccentric stroke adjustment. Available in direct drive or pulley drive for an additional 4:1 range ability on stroke frequency with a standard induction motor. When the pulley drive arrangement is combined with a DC variable speed motor, total operating turndown can be as high as 800:1. Repeatable metering accuracy is ± 2% of full scale. Valve assemblies can be easily maintained with without disturbing the suction and discharge piping and clear PVC valve housing allows visual indication of operation.

Click here for more information on UGSI Encore 700

Flowserve

Flowserve centrifugal, positive displacement and specialty pumps include the following pumps for industrial and engineered applications: Overhung pumps: ANSI/ASME, API, mag drive, close coupled and slurry and solids handling. Between bearings pumps: single case axially and radially split, double case and multi-stage boiler feed. Vertical pumps: wet pit, double case, deep well submersible, slurry and solids handling and sump. Positive displacement pumps: including gear, screw, multiphase and reciprocating. Heritage brands include Ingersoll Dresser, Worthington, Durco, Byron Jackson, Pacific. http://flowserve.com/Products/Heritage-Brands

Viking

Viking pump is the global leader in positive displacement pumping solutions, which includes: internal gear, external gear, rotary vane, industrial lobe, gear reducers and strainers.

Weir Minerals

Weir Minerals are specialists in delivering and supporting slurry equipment solutions including pumps, hydrocyclones, valves, screen machines and screen media, rubber and wear resistant linings for global mining and mineral processing, the power sector and general industry. Heritage Brands include Warman, Hazelton, Ash and Galigher

Moyno

NOV-Moyno provides industry leading progressive cavity pumps, including general utility, large solids transfer, sanitary, metering, mag drive, Ezstrip transfer, cake and muncher, and packaged systems for mine dewatering. Moyno’s EZStrip™ Transfer Pump reduces maintenance time by more than 90%.

Innomag – Sealless Magnetic Driven Centrifugal Pumps

Innomag Sealless Magnetic Driven Centrifugal, Zero Immision Pump. Innomag has manufactured Sealless, Non-metallic, Magnetically Driven Pumps since 1998. The Thrust Balanced (TB)product line, the TB-mag series, revolutionized the non-metallic, mag-drive pumping industry as the first fully thrust-balanced pump with the ability to handle solids. This was truly a first for this class of pumps, no longer do you need perfectly clean liquids! The thrust balance technology behind the TB-mag series completely eliminates axial thrust bearings and provides the basis for a controlled internal environment. Superior engineering design minimizes the issue of secondary containment by providing secondary bearings. No other product on the market to day offers these features at such a cost-effective and cost-competitive price.

Gorman-Rupp Pumps

Gorman-Rupp's extensive line of pump products include self-priming centrifugal pumps, standard centrifugal pumps, submersible pumps, trash pumps, priming assisted pumps, and complete lift and booster station packages.

Click here to learn about customer pump training opportunities

Wilden Pumps

Since 1955 Wilden has been the market leader in air-operated double-diaphragm pumps. Wilden is deeply committed to the pursuit of excellence, customer satisfaction, research & development and market knowledge.

Borger – Rotary Lobe Pumps & Grinders

Borger Rotary Lobe Pumps are positive displacement  pump transferring sludge to and from thickeners, belt presses, centrifuges, rotary presses,  digesters , air entrained fluids, DAF, and industrial slurries. They handle thick solids greater than 2% up to 2000 gpm and pressures up t0 150 PSI. Rotary lobe pumps can run dry and are capable of self-priming. The rotation of the pair of lobes increases suction chamber pressure and creates a vacuum on the priming side of the pump drawing liquid into the pump chamber.

Lightnin Mixers – Agitators, Aerators; NETTCO Mixers; Plenty Mixers and Pumps.

Lightnin- Mixers A World Leader in Industrial Mixing since 1923, Lightnin has 90 years of unrivaled experience in industrial mixing technology, process knowledge, and technological innovation. Lightnin enjoys a global reputation for durable, long-lasting mixers, agitators, aerators, and flocculators for fluid process systems. We offer a full spectrum of impeller designs for diverse applications. In addition, we offer a worldwide service network, mixer repair, gearbox repair, and replacement parts programs. Look to JCI and Lightnin for knowledge, technology, and service excellence.

CHEMICALS – PETROCHEMICALS, MINERALS PROCESSING, PHOSPHATES & FERTILIZER, FLUE GAS DESULPHURIZATION, FOOD & BEVERAGE, PHARMACEUTICALS, WATER AND WASTEWATER TREATMENT.

Pulsafeeder

Precision Diaphragm Metering Pumps

Click here for more information on PULSAPRO

Kontro

Sealless Pumps

Wright Flow Technologies

Food Grade Lobe and Circumferential Piston Pumps

Micropump

Precision Low Flow Pumps

Finish Thompson

Drum and Barrel Pumps

Corken

Rotary Vane Pumps

Sero

Side Channel Low Flow Pumps

Ebara

Multistage High Pressure Centrifugal, SS Horizontal Centrifugal, and Submersible Pumps