Engineered for flexibility, versatility and lean installation, these space saving mixers offer highly efficient solutions for any tank shape and size. Our compact mixers easily blend highly contaminated fluids high-density or high-viscosity liquids, and liquids with fibrous material.
Few components, low capital investment and straightforward service routines make Flygt compact mixers the economical choice for a broad range of mixing applications, like Activated sludge treatment selector basins, sludge mixing and aeration basins.
Flygt compact mixer components have not only been engineered for reliable operation and efficient mixing, but to reduce energy costs as well.
Xylem’s Flygt squirrel-cage induction motor is manufactured for durability and dependability. Stator windings are trickle impregnated in resin and rated at Class H 180 degrees C (355 degrees F) for excellent resistance to overheating.
The Flygt plug-in seal features the Active Seal system for zero leakage into the stator housing. Laser-cut grooves on the inner seal faces act as a micro-pump to force any liquid present on the drive-unit back to the buffer fluid side. The seal housing with the barrier fluid helps lubricate and cool the seal, ensuring efficient heat transfer even when running dry.
Engineered to generate maximum thrust with minimal use of energy, the propeller blades, with their backswept design, allow highly fibrous material to pass through, while the wide-hub design deflects fibrous material.
It is possible to increase mixer efficiency by up to 15% in water, and even higher in viscous liquids, with the optional jet ring, while further reducing energy consumption.
Flygt equipment is rigid enough to withstand the weight and reaction forces exerted by the mixer throughout its operating life. It’s not only robust, but easy to maintain.
Flygt compact mixers are usually installed along rigid guide bars at appropriate depths to optimize mixing efficiency, and to help withstand fatigue from strongly fluctuating forces within the tank. Used together with Flygt lifting equipment, guide bar systems enable easy access for inspection and service.
Raising and lowering Flygt compact mixers with Flygt lifting equipment is as easy and convenient as it is safe. The CE-approved lifting davit is mounted in a holder at its lower end, which enables easy turning of the davit. To reduce investment cost, one davit can be used for several mixers.
Problem: The wastewater utility had to monthly manually vactor out the scum that accumulates from fats, oils and grease trapped in the primary scum trough which was costly, odorous and messy. The existing scum pumps would only pump out the clear liquid beneath leaving a floating scum mat that built up and needed to be vactored out.
Solution: Added Flygt compact 2.5HP submersible mixers on a timer and set to turn on prior to operation of scum pump. The fats, oils, grease (FOG) and floatables are entrained and pumped away. No need for sending in a truck to suck out the grease. A Flygt pump with N-hydraulics was installed to retrofit screw induced pumps. The Flygt’s self cleaning impeller to handle the challenging scum/debris without clogging.