Primozone – Ozone Water Systems– Maintenance free and easy to operate ozone generators thanks to a unique energy saving and modular plate reactor technology with built-in redundancy. Provides lower CAPEX and OPEX compared to the conventional ozone generating systems. Only maintenance is a yearly inspection – NO time consuming cleaning of the reactor is required. Capacity turndown and total energy consumption is nearly linear where if operated at 10% capacity, the energy consumed is 10% of max capacity.
PSI Water Technologies- UGSI; PSI, Microclor, PAX, Monoclor – manufactures an On‐site generation disinfection system that applies electricity to a solution of salt and water to produce sodium hypochlorite. Incoming water first goes through a softener, then splits into two lines. One line goes to the electrolytic cell, where electricity is applied to the brine solution, and the other goes to a brine storage tank. Near‐saturated brine is injected into the softened water that is going to the electrolytic cell.
Evoqua ETS UV Technology is used disinfect the municipal wastewater before discharge into a water source. The ETS-UV™ system uses a closed vessel approach, which means greater operator safety, a smaller footprint and easier for plant staff to maintain. The enclosed approach is quickly gaining favor over the older open channel UV systems because of reduced operating life costs and greater operator safety. The UV chamber is fabricated from 316L stainless steel and contains an automated wiper system that keeps the quartz free from fouling.
ETS UV Technology Disinfection